Introduction
When constructed and operated according to the Standard Baseline Recommendations (SRB), the Integrated Aqua-Vegeculture System (iAVs) can maintain a naturally stable pH near 6.4 through the biological relationship between fish, plants and microorganisms, avoiding the routine chemical pH adjustments commonly recommended for conventional aquaponics.
Has scientific research demonstrated that iAVs can naturally maintain a stable pH near 6.4 without routine chemical adjustment?
Yes. The original North Carolina State University research demonstrated that planted iAVs systems could maintain a stable, mildly acidic pH without routine additions of lime or other alkaline chemicals.
The strongest experimental evidence appears in Effects of Biofilter/Culture Tank Volume Ratios on Productivity of a Recirculating Fish/Vegetable Co-Culture System, published in the Journal of Applied Aquaculture.
Dr. Mark R. McMurtry and colleagues investigated water chemistry, fish production and vegetable productivity in sixteen replicated recirculating systems over three experimental phases.
During the first experiment, pH stabilised at approximately 5.8–6.2 without lime additions.
During the third experiment, once the biological system had recovered from an earlier experimental period without plants, pH stabilised at 6.3–6.5 without further liming (McMurtry et al., 1997).
The investigators explicitly identified self-regulating pH as an important feature of their integrated production system.
Their findings demonstrated that a properly balanced combination of fish production, biological filtration and active plant growth could sustain an operating pH favourable to vegetable cultivation while maintaining satisfactory aquaculture water quality.
The significant result was the stability of the biological system without continuing chemical intervention.
The frequently cited iAVs operating target of pH 6.4 is therefore grounded in experimental observations from the original NCSU research, rather than being an arbitrary theoretical recommendation.
What experimental evidence most directly demonstrates that plants are responsible for this pH stability?
The NCSU researchers deliberately operated their systems without plants for 42 days to investigate the contribution of vegetable cultivation to pH regulation.
This experiment provides particularly strong evidence because the investigators intentionally removed the plant component while continuing fish production and biological filtration.
During Experiment 2, the researchers maintained fish populations and feeding while leaving the sand biofilters unplanted.
Their purpose was to investigate whether growing plants contributed to the chemical buffering of the recirculating water.
The result was dramatic.
Within 42 days, pH declined from approximately 6.0 to 4.3 or lower across all treatments.
The researchers attributed this decline to acid production associated with nitrification in the absence of active plant nutrient uptake (McMurtry et al., 1997).
Corrective additions of calcium-magnesium carbonate were subsequently made. After cucumbers were planted, further calcium oxide additions were required because pH remained below the desired level in several treatments.
These additions were necessary during recovery from the deliberately induced acidification.
In the subsequent experiment, tomato plants were established and the systems returned to productive operation.
Once pH had recovered, further liming ceased, and the water remained stable in the 6.3–6.5 range for the remainder of the study (McMurtry et al., 1997).
The contrast was decisive:
With productive plant growth, pH stabilised. Without plants, the same system acidified rapidly.
The experiment therefore demonstrated that actively growing vegetables were integral to the system's pH-regulating behaviour.
What biological mechanism explains why actively growing plants can counteract the acidification caused by nitrification?
Plant roots influence the acid–base balance of their surrounding environment through the uptake of mineral nutrients, particularly negatively charged ions such as nitrate.
Nitrification converts ammonium into nitrite and then nitrate.
The overall process produces hydrogen ions, increasing acidity.
In an aquaculture system without sufficient processes to counteract this acid production, the pH tends to decline as nitrification continues.
The simplified overall nitrification reaction is:
NH4+ + 2O2 → NO3− + 2H+ + H2O
However, plants growing in the sand beds continually remove nitrate and other nutrients from the recirculating system.
When roots absorb negatively charged ions, they must maintain electrical balance across their cell membranes.
Depending on the balance of absorbed ions, plants may release hydroxyl ions (OH−) or bicarbonate ions (HCO3−), or otherwise consume acidity in the rhizosphere.
These processes can increase pH in the root environment.
McMurtry and colleagues proposed that the alkalinising effects associated with plant anion uptake were counteracting the acidity generated by nitrification (McMurtry et al., 1997).
Their explanation drew on established plant mineral-nutrition science, particularly the work of Marschner (1995).
Independent research confirms the general mechanism.
Neina (2019) reviewed the biological regulation of soil pH and explained how nitrate uptake can increase rhizosphere pH through the release of hydroxyl or bicarbonate ions.
The response is influenced by the balance of cation and anion uptake, plant species and growth conditions.
In iAVs, this chemistry occurs within an integrated sand environment where plant roots, fish-derived nutrients and microorganisms interact.
The NCSU experiments directly demonstrated the resulting pH stability. The proposed contribution of plant anion uptake provides a scientifically supported explanation, although the researchers did not separately quantify every acid-producing and acid-consuming reaction.
The biological system contains processes capable of counteracting nitrification acidity through plant nutrient uptake, helping maintain a stable pH without continual external alkaline additions.
Why is this relationship particularly effective in the original iAVs sand biofilter?
Because iAVs integrates biological filtration, organic-waste processing and active vegetable cultivation within the same growing medium.
In the original system, fish-tank water containing dissolved nutrients and suspended organic wastes is intermittently delivered directly to sand-bed furrows.
The sand retains suspended organic particles near the surface while allowing treated water to percolate through the bed and return to the fish tank.
Microorganisms decompose the retained organic matter and participate in the transformation of nitrogen compounds.
The sand provides a moist, well-aerated habitat for microbial activity and plant roots.
At the same time, growing plants continually absorb the mineral nutrients produced and circulated through the system.
The NCSU researchers observed that oxygen and nutrients were replenished through eight daily irrigation events.
They reported no clogging or evidence of localised anaerobic conditions in the sand beds during the study (McMurtry et al., 1997).
This arrangement brings the processes of nutrient production, microbial transformation and plant nutrient assimilation into a common biological environment.
It enables the growing crop to participate directly in the chemical balance of the recirculating production system.
The original research also showed that larger sand biofilters improved several water-quality characteristics, including reduced concentrations of total ammoniacal nitrogen and nitrite.
The researchers concluded that the enlarged plant-growing filtration component contributed to the performance of the integrated system.
The sand biofilter's importance lies in the biological functions it supports: aerobic microbial activity, nutrient retention, root growth and the assimilation of compounds involved in acid–base regulation.
What are the Standard Baseline Recommendations, and why is it relevant to maintaining pH stability?
The SRB establishes the recommended relationship between fish production, nutrient input, biological filtration, plant-growing area and operating conditions.
It is derived from the NCSU research programme and provides a consistent reference configuration for constructing and operating iAVs.
The standard module consists of a 1,000-litre fish tank associated with approximately 6 m² of sand biofilter, filled to a depth of approximately 0.33 m.
This gives an approximate fish-tank-to-sand-bed ratio of 1:2 by volume and 1:6 when tank volume in cubic metres is compared with growing-bed area in square metres.
The baseline specifies appropriately graded angular quartz sand, intermittent daytime irrigation, free drainage, suitable plant density and balanced fish feeding.
The recommendations also address fish species, water temperature, dissolved oxygen and the relationship between feed input and plant nutrient demand.
The original NCSU investigations tested biofilter-to-tank volume ratios of 0.67:1, 1:1, 1.5:1 and 2.25:1. The standard 2:1 sand-biofilter-to-tank volume recommendation is a conservative interpolation informed by those experiments, rather than an exact ratio independently tested in that series (iAVs.info, 2026).
This distinction is relevant because pH regulation depends on the functioning of the entire integrated system.
A greatly reduced plant-growing area, excessive fish feeding or insufficient plant growth may alter the balance between acid generation and nutrient assimilation.
Similarly, unsuitable growing media or poor drainage may interfere with the biological environment established by the original design.
The SRB aims to preserve the relationships under which satisfactory performance was demonstrated.
The expectation of natural pH stability is based on operating a balanced fish–plant–microbial system, not merely placing fish water in contact with sand.
Does pH naturally become stable immediately after a new iAVs installation begins operating?
No. The original experiments demonstrate that biological establishment and stabilisation occur over time.
In Experiment 1, the NCSU researchers recorded an initial increase in pH from approximately 6.5 to 7.4 during the first two weeks.
This coincided with establishment of bacterial and plant populations.
By the fifth week, pH had declined to approximately 6.0 across the treatments and subsequently remained stable (McMurtry et al., 1997).
These observations show that a newly established system can undergo temporary changes while microbial populations, nutrient cycling and plant growth become established.
The important finding is that the system subsequently reached a stable operating range without routine lime additions.
The SRB therefore describes the expected behaviour of an appropriately established and balanced system.
It does not imply that the water will automatically measure exactly pH 6.4 from the first day of operation.
Initial source-water chemistry, biological establishment and the development of the growing crop all influence the transition toward stable operation.
The original research demonstrated convergence toward a stable pH during system establishment, followed by sustained stability under suitable operating conditions.
How does this differ from the pH management commonly recommended for conventional aquaponics?
Conventional aquaponics guidance frequently recommends monitoring and correcting pH through the addition of alkaline compounds or carbonate buffers.
The Food and Agriculture Organization's 2014 manual, Small-Scale Aquaponic Food Production, explains that aquaponics water naturally acidifies through processes including nitrification.
It recommends adding bases or carbonate buffers when pH becomes too low, particularly in systems using source water with low alkalinity.
The recommended amendments include calcium hydroxide, potassium hydroxide, calcium carbonate and potassium carbonate (Somerville et al., 2014).
New Mexico State University provides similarly explicit guidance.
Its extension publication Important Water Quality Parameters in Aquaponics Systems explains that pH normally declines because of nitrification.
It recommends adjustment when pH falls below 6.4, using calcium hydroxide or potassium hydroxide to restore the water toward pH 7.0.
It also recommends alternating these compounds because they provide calcium and potassium nutrients to the production system (Sallenave, 2026).
Oklahoma State University likewise recommends chemical adjustment when aquaponics pH falls outside the suggested operating range, including carbonate, bicarbonate and hydroxide compounds for increasing pH (Oklahoma State University Extension, undated).
These recommendations demonstrate the conventional approach to pH management.
The original iAVs experiments established a different operating behaviour.
Rather than continually replacing alkalinity through routine chemical applications, the planted system demonstrated the capacity to maintain a stable mildly acidic pH through its integrated biological processes (McMurtry et al., 1997).
The comparison concerns documented operating practices. Some conventional aquaponics systems can also achieve stable pH without frequent intervention, particularly when source-water alkalinity and biological processes are appropriately balanced.
Nevertheless, the NCSU research specifically demonstrated pH self-regulation without routine liming as an important attribute of the iAVs design.
Conventional aquaponics guidance often prescribes alkaline amendments to counteract acidification. Properly balanced iAVs demonstrated the capacity to maintain its operating pH without those recurring additions.
Is a pH near 6.4 compatible with effective biological filtration?
Yes. The NCSU research demonstrated effective biological water treatment at pH values below the conventional optimum for maximum nitrification rates.
It is commonly stated that nitrifying microorganisms perform most efficiently at approximately pH 7–8 or somewhat higher, depending on the organisms and conditions.
However, the pH associated with maximum activity under particular conditions is not necessarily the minimum pH at which nitrification can sustain a functioning integrated production system.
McMurtry and colleagues explicitly addressed this issue.
They noted that substantial nitrification could occur below the commonly cited optimum and supported that conclusion with their experimental water-quality results.
In Experiment 3, total ammoniacal nitrogen concentrations were approximately 0.48–0.96 mg/L across the treatments, while nitrite concentrations were approximately 0.02–0.06 mg/L in the overall reported treatment summaries.
These measurements accompanied satisfactory fish production and vegetable growth (McMurtry et al., 1997).
The results show that the biological filtration system was functioning effectively at the mildly acidic pH observed in the trials.
Independent research has subsequently provided further support for productive aquaponics operation below pH 7.
Wang, Yang and Kim (2023) investigated coupled aquaponics systems operated at pH 6.0, 6.5 and 7.0.
Their experiments found improved vegetable productivity at lower pH without a significant reduction in fish yield or measured ammonia-oxidising bacterial abundance.
The study was conducted in a conventional aquaponics configuration rather than iAVs, but its findings support the broader physiological compatibility of fish production, plant growth and biological nitrogen processing under mildly acidic operating conditions.
The original iAVs data demonstrate that pH near 6.4 does not inherently compromise the biological treatment required for productive fish-and-vegetable cultivation.
Does maintaining a mildly acidic pH offer an additional advantage for fish safety?
Yes. Lower pH reduces the proportion of total ammoniacal nitrogen present as un-ionised ammonia, NH3, which is substantially more toxic to fish than ammonium, NH4+.
The equilibrium between these forms depends on pH and temperature.
As pH increases, a larger fraction of the total ammonia pool is present as un-ionised NH3.
As pH decreases, the equilibrium shifts toward ammonium.
New Mexico State University's aquaponics water-quality guidance describes this relationship and provides calculation tables showing how the fraction of un-ionised ammonia increases with pH and temperature (Sallenave, 2026).
McMurtry and colleagues specifically recognised this advantage of operating below pH 7.
They observed that the proportion of free ammonia was low under their mildly acidic operating conditions (McMurtry et al., 1997).
This does not eliminate the need for biological filtration or ammonia monitoring.
Excessive total ammoniacal nitrogen can still indicate inadequate treatment capacity, and the un-ionised fraction remains sensitive to water temperature.
Nevertheless, the low-pH operating environment reduces the proportion of the most toxic ammonia species.
The approximately 6.4 operating pH demonstrated in iAVs is compatible with the biological treatment system while providing a favourable ammonia-speciation environment for fish.
Does the original research support the conventional assumption that aquaponics must operate near pH 7 as a compromise between plants, fish and bacteria?
It demonstrates that pH 7 is not a universal requirement for productive integrated fish-and-vegetable cultivation.
Conventional aquaponics guidance often recommends an operating pH close to 7 because fish, plants and nitrifying microorganisms have different preferred ranges.
However, those recommendations depend on the production system, the species involved and the physical and biological treatment arrangements.
The NCSU research demonstrated a planted sand-biofilter system capable of maintaining satisfactory water quality and crop production at lower pH values.
The researchers also observed that nutrient availability and assimilation could be sustained under these conditions (McMurtry et al., 1997).
This finding is significant because pH affects both nutrient chemistry and root uptake.
Mildly acidic conditions can favour the availability of several essential mineral nutrients, including iron and manganese.
In a 2023 experimental study, Wang, Yang and Kim compared six vegetable crops grown in aquaponics at pH 6.0, 6.5 and 7.0.
They found that lower pH increased fresh and dry plant biomass and improved several plant tissue nutrient concentrations.
They concluded that pH 6.0 was favourable for crop productivity without compromising measured fish production or the abundance of ammonia-oxidising bacteria (Wang et al., 2023).
These findings support the scientific significance of the earlier iAVs operating range.
The approximately neutral pH commonly recommended in aquaponics is an engineering compromise for particular system designs, not proof that an integrated production system cannot function effectively at pH 6.4.
Why is chemically inert quartz sand important to the interpretation of pH self-regulation?
Because the observed biological stability must be distinguished from pH changes caused by reactive minerals in the growing medium.
The standard iAVs methodology specifies suitable quartz sand with appropriate particle-size distribution and drainage characteristics.
Quartz is comparatively chemically inert under ordinary aquaculture conditions.
This differs from carbonate-containing growing media, such as limestone, which can dissolve and release alkalinity into the water.
A system containing substantial calcium carbonate may resist acidification through mineral dissolution.
Such chemical buffering is a recognised method of maintaining pH in conventional aquaponics.
The iAVs methodology instead emphasises an integrated biological balance involving plants, fish wastes and microbial transformations.
The 1997 experimental findings are consistent with that mechanism, particularly because deliberate removal of plants resulted in rapid acidification despite the sand biofilter remaining in place.
The experiment therefore demonstrates that the continued presence of sand alone was insufficient to maintain the previously stable pH.
The living plant component was important.
Source-water alkalinity and accumulated biological products may also contribute to the overall chemical balance.
Consequently, the original observations should not be interpreted as showing that inert quartz sand intrinsically produces or maintains pH 6.4.
The distinguishing feature is the integrated biological activity supported by the sand beds, rather than a requirement for reactive limestone or continual chemical buffering.
Why is the balance between fish feed input and active plant growth important for maintaining this stability?
Because fish feeding supplies the nitrogen that drives acid-generating biological processes, while growing plants remove nutrients and influence acid–base balance.
The quantity of nitrogen entering the system depends substantially on the feed supplied to the fish.
Fish metabolism and the microbial decomposition of organic waste release nitrogen compounds that enter the nitrogen cycle.
Nitrification contributes to acid production.
Meanwhile, plants remove nitrate and other nutrients from the growing environment.
Their uptake processes can counteract a portion of the acidification.
Consequently, the relative rates of nutrient input, microbial transformation and plant uptake are important to pH behaviour.
The NCSU research demonstrated this relationship most directly when the crop component was removed while fish feeding continued.
Acidification rapidly increased in the absence of growing plants (McMurtry et al., 1997).
The SRB therefore incorporates a balanced relationship between fish production and growing-bed area, rather than treating the sand biofilter as an independent filtration device.
Feed input, fish density, plant density, temperature and crop development all influence the biological balance.
When these relationships are maintained within the recommended operating conditions, pH self-regulation becomes an experimentally supported expectation.
Stable pH is an outcome of balanced nutrient input and biological activity. The planted sand biofilter participates directly in maintaining that balance.
Would the removal of plants or a substantial interruption to plant growth affect pH stability?
Yes. The original experiments directly demonstrated this effect.
During the 42-day unplanted interval in Experiment 2, pH declined rapidly to 4.3 or lower (McMurtry et al., 1997).
This is a particularly important result because it demonstrates that plant growth is not incidental to the system's water chemistry.
Removing the plants eliminated an important component of the acid–base balance.
The fish continued producing nitrogenous waste, while biological nitrification continued generating acidity.
The resulting acidification required corrective intervention.
When plants were reintroduced and the system subsequently recovered, stable pH was restored.
The observations also explain why the SRB should not be separated into individual components without considering their interactions.
An unplanted sand biofilter cannot be assumed to reproduce the chemical behaviour of a productive iAVs growing bed.
Similarly, substantial interruptions to crop growth, major changes in feeding or inadequate plant biomass can alter the expected relationship between acid production and nutrient uptake.
The documented pH stability depends on an actively functioning fish–plant production system. Maintaining the biological relationship demonstrated in the original research is fundamental to the SRB.
Does the need for corrective liming during Experiment 2 contradict the claim that iAVs can operate without routine pH adjustment?
No. The corrective additions followed a deliberate experimental interruption to the normal planted operating conditions.
The three experimental phases need to be distinguished.
Experiment 1 demonstrated planted operation with pH approximately 5.8–6.2 and no lime additions.
Experiment 2 deliberately removed the vegetable-growing component for 42 days, causing pH to fall to 4.3 or lower.
The researchers subsequently added carbonate and oxide amendments to correct the acidification.
In Experiment 3, after the system had been replanted and recovered from the preceding disturbance, pH stabilised at 6.3–6.5 without further liming (McMurtry et al., 1997).
The authors reported these phases transparently.
Their final discussion described stable pH without liming as an important achievement of the balanced fish-and-vegetable production system.
The distinction is between routine chemical management during normal operation and corrective intervention after the system's biological balance has been intentionally disrupted.
An experiment designed to remove the plant component cannot be treated as representative of normal SRB operation, because growing plants are integral to the standard design.
The recovery period also demonstrates that severe acidification may require corrective treatment before stable operation can resume.
The need for corrective liming after deliberately eliminating plant growth supports, rather than contradicts, the conclusion that the planted system possesses an important biological pH-regulating function.
Does natural pH stability eliminate the need for water-quality testing or operator responsibility?
No. The original finding concerns a reduced requirement for routine chemical adjustment, not the elimination of water-quality management.
The SRB assumes appropriate management of fish, plants, feeding, water quality and environmental conditions.
Even a balanced system can be affected by changes in source-water composition, temperature, fish mortality, feeding, plant development or biological activity.
The published research demonstrates what was achieved under particular operating conditions.
It does not establish that every installation will produce identical pH readings regardless of location, water chemistry or management.
The recommended operating range should therefore be verified through monitoring.
Routine pH testing also provides a means of detecting changes that may indicate an altered biological balance.
However, measuring pH is different from routinely adding chemicals to force it toward a predetermined value.
In the original NCSU experiments, normal planted operation produced stable pH without recurring alkaline amendments during the relevant phases.
The SRB supports regular observation and appropriate water-quality monitoring while relying on the established biological system to maintain pH where operating conditions remain balanced.
What is the strongest scientific evidence supporting the proposition?
The strongest evidence is the direct comparison between planted and unplanted operation, supported by measurements from multiple experimental phases and independent scientific understanding of root-zone acid–base regulation.
The NCSU study produced three key observations.
First, during Experiment 1, pH stabilised at approximately 5.8–6.2 without lime additions.
Second, when plants were deliberately removed for 42 days, pH declined from approximately 6.0 to 4.3 or lower.
Third, after crop growth was re-established and the system recovered, pH stabilised at approximately 6.3–6.5 without further liming during the remainder of Experiment 3 (McMurtry et al., 1997).
These findings establish that the presence or absence of growing plants materially affected the pH behaviour of the system.
The investigators explained the results through a plausible biological mechanism: plant uptake of nitrate, phosphate and other anions could counteract acidity generated through nitrification.
Independent plant nutrition research confirms that anion uptake can increase rhizosphere pH through hydroxyl or bicarbonate release and associated acid–base regulation (Marschner, 1995; Neina, 2019).
The NCSU experiments also demonstrated satisfactory biological water treatment and crop production within the mildly acidic operating range.
More recent aquaponics research has independently confirmed that productive fish-and-plant cultivation can occur at pH values of 6.0–6.5 and that lower operating pH may benefit vegetable productivity (Wang et al., 2023).
Meanwhile, conventional aquaponics technical guidance explicitly recommends the addition of alkaline compounds when acidification causes pH to decline below acceptable limits (Somerville et al., 2014; Sallenave, 2026).
These independent lines of evidence support the conclusion that iAVs can achieve natural pH stability near 6.4 through its integrated biological design, avoiding the recurring chemical pH adjustments prescribed for many conventional aquaponics systems.
What conclusion follows from the published scientific record?
The proposition is supported by direct experimental evidence.
McMurtry and his colleagues demonstrated that planted iAVs systems could maintain a stable mildly acidic pH without routine alkaline additions.
Their research further established that growing plants contributed substantially to that stability.
When plants were removed, pH declined rapidly.
When active plant growth was restored and the systems recovered, pH again became stable.
The researchers identified plant anion uptake as a probable mechanism counteracting nitrification acidity.
Independent plant physiology research supports that explanation.
The experiments also showed that the resulting operating range was compatible with productive vegetable cultivation, fish growth and effective biological filtration.
Conventional aquaponics guidance commonly recommends adding carbonates, hydroxides or other alkaline compounds to manage acidification.
The original iAVs design demonstrated that such recurring chemical intervention was not necessary during properly balanced planted operation under the experimental conditions.
The SRB preserves the essential relationships between fish production, nutrient input, sand biofilter capacity and active crop growth that support this behaviour.
The operating target of approximately pH 6.4 reflects the stable conditions observed in the NCSU work, particularly the 6.3–6.5 range reported during the final experimental phase.
Dr. Mark R. McMurtry and his colleagues demonstrated that a balanced, planted Integrated Aqua-Vegeculture System can maintain its pH naturally near 6.4, without the continual chemical correction commonly associated with conventional aquaponics.
This was an experimentally demonstrated characteristic of iAVs in the late 1980s, subsequently documented in peer-reviewed literature. It remains one of the important scientific and operational features of the original system.
References
- iAVs.info. (2026). Understanding the Standard iAVs Baseline. Published 10 June 2026. Summarises the recommended tank-to-biofilter relationship, sand specifications, fish stocking, nutrient loading, pH and operating conditions derived from the NCSU research.
https://iavs.info/understanding-the-standard-iavs-baseline/
- Marschner, H. (1995). Mineral Nutrition of Higher Plants. Second edition. Academic Press. Establishes the influence of plant nutrient uptake, root ion exchange and rhizosphere acid–base regulation on growing-medium pH.
- McMurtry, M. R., Sanders, D. C., Cure, J. D., & Hodson, R. G. (1997). Effects of Biofilter/Culture Tank Volume Ratios on Productivity of a Recirculating Fish/Vegetable Co-Culture System. Journal of Applied Aquaculture, 7(4), 33–51. Primary experimental evidence for self-regulating pH, the 42-day unplanted trial, the recovery following acidification and the subsequent stability at pH 6.3–6.5 without liming. See particularly pp. 40–44 and 47–48. Full-text research paper:
https://doi.org/10.1300/J028v07n04_03
- Neina, D. (2019). The Role of Soil pH in Plant Nutrition and Soil Remediation. Applied and Environmental Soil Science, 2019, Article 5794869. Explains biological regulation of soil pH, including the effects of nitrate uptake, hydroxyl release, bicarbonate release and root-zone nutrient exchange.
https://doi.org/10.1155/2019/5794869
- Oklahoma State University Extension. (undated). Aquaponics. Agricultural extension guidance describing conventional aquaponics pH targets and corrective additions of alkaline and acidic compounds.
https://extension.okstate.edu/fact-sheets/aquaponics
- Sallenave, R. (2026). Important Water Quality Parameters in Aquaponics Systems. Circular 680. New Mexico State University Cooperative Extension Service. Revised June 2026. Describes acidification through nitrification, conventional pH management, recommended alkaline additions and ammonia speciation.
https://pubs.nmsu.edu/_circulars/CR680/
- Somerville, C., Cohen, M., Pantanella, E., Stankus, A., & Lovatelli, A. (2014). Small-Scale Aquaponic Food Production: Integrated Fish and Plant Farming. FAO Fisheries and Aquaculture Technical Paper No. 589. Rome: Food and Agriculture Organization of the United Nations. See Chapter 3, Water Quality in Aquaponics, particularly the sections on pH manipulation and carbonate hardness. Accessible HTML edition of Chapter 3:
https://www.fao.org/4/i4021e/i4021e.pdf
- Wang, Y.-J., Yang, T., & Kim, H.-J. (2023). pH Dynamics in Aquaponic Systems: Implications for Plant and Fish Crop Productivity and Yield. Sustainability, 15(9), 7137. Experimental comparison of pH 6.0, 6.5 and 7.0 in coupled aquaponics, examining plant productivity, nutrient concentrations, fish performance and ammonia-oxidising bacterial abundance.
https://doi.org/10.3390/su15097137